DESEMPENHO TÉCNICO E ECONÔMICO DO FELLER-BUNCHER EM DISTINTAS CARACTERÍSTICAS DENDROMÉTRICAS DO POVOAMENTO FLORESTAL

Autores

  • Romulo de Castro Teixeira romulocastroteixeira@gmail.com
    UFV
  • Diego Weslly Ferreira do Nascimento Santos diegoweslley89@hotmail.com
    UFV
  • Haroldo Carlos Fernandes haroldo@ufv.br
    UFV
  • Juliana Pinheiro Dadalto juliana.dadalto@ufv.br
    Universidade federal de Viçosa

DOI:

10.31413/nativa.v6i0.6177

Resumo

Os dados técnicos e econômicos disponíveis das máquinas de colheita florestal são insuficientes, sendo em algumas condições de trabalho inexistentes. Objetivou-se com a presente pesquisa analisar o desempenho técnico e econômico do feller-buncher em diferentes condições do povoamento florestal. O estudo foi executado em áreas de colheita florestal localizadas na região sul do estado de Mato grosso. Foi realizado o estudo de tempos e movimentos, produtividade, disponibilidade mecânica, eficiência operacional, custo operacional e de produção do feller-buncher nos volumes de 0,14; 0,16; 0,18; e 0,26 m³ por árvore. O volume individual das toras influenciou de forma significativa no tempo médio por ciclo operacional, produtividade e custo de produção, sendo os melhores valores encontrados nos maiores volumes. Foi observado uma disponibilidade mecânica média de 83%, eficiência operacional de 96% e custo operacional de 305,45 R$ h-1.  O volume por árvore demostrou-se como uma variável de extrema importância para o planejamento florestal.

Palavras-chave: colheita florestal, mecanização florestal, custos.

 

TECHNICAL AND ECONOMIC PERFORMANCE OF THE FELLER-BUNCHER IN DIFFERENT DENDROMETRIC CHARACTERISTICS OF FOREST STANDS

 

ABSTRACT:

The technical and economic data available on forestry harvesting machines are insufficient, and in some working conditions nonexistent. The objective of this research was to analyze the technical and economic performance of the feller-buncher in different forest stand conditions. The study was carried out in forest harvesting areas located in the southern region of the state of Mato Grosso. The study of time and movements, productivity, mechanical availability, operational efficiency, operating and production costs of the feller-buncher in the volumes of 0.14; 0.16; 0.18; and 0.26 m³ per tree. The individual volumes of the logs had a significant influence on the average time per operational cycle, productivity and cost of production, with the best values found in the largest volumes. An average mechanical availability of 83%, operating efficiency of 96% and operating cost of 305.45 R $ h-1 was observed. The volume per tree has been shown to be an extremely important variable for forest planning.

Keywords: forest harvesting, forest mechanization, costs.

Biografia do Autor

Romulo de Castro Teixeira, UFV

Graduação em engenharia Florestal

Diego Weslly Ferreira do Nascimento Santos, UFV

Doutorando em engenharia Agricola, Departamento de engenharia agricola, UFV

Haroldo Carlos Fernandes, UFV

Professor departamento de engenharia agricola, UFV

Referências

ASAE_AMERICAN SOCIETY OF AGRICULTURAL ENGINEERS. ASAE standards 2011: machinery, equipment and buildings: operating costs. Iowa: Ames, 2001. p. 164-226.

BARNES, R.M. Motion and time study: design and measurement of work. 6 ed. New York: John Willey & Sons, 1968. 799 p.

HUSCH, B.; BEERS, T. W.; KERSHAW JR., J. A. Forest mensuration. 4.ed. Hoboken, New Jersey: John Wiley & Sons, 2003. 443p.

NASCIMENTO, A. C.; LEITE, A. M. P.; SOARES, T. S. FREITAS, L. C. Avaliação técnica e econômica da colheita florestal com feller-buncher. Cerne, Lavras, v. 17, n. 1, p. 9-15, jan./mar. 2011. DOI: http://dx.doi.org/10.1590/S0104-77602011000100002

PEREIRA, A. L. N.; LOPES, E. S.; DIAS, A. N.; Avaliação técnica e de custo do feller-buncher e skidder na colheita de madeira em diferentes produtividades do povoamento. Ciência Florestal, Santa Maria, v. 25, n. 4, p. 981-989, out.-dez., 2015. DOI: http://dx.doi.org/10.5902/1980509820659

SILVA, E. N.; MACHADO, C. C.; FIEDLER, N. C.; FERNANDES, H. C.; PAULA, M. O.; CARMO, F. C.; MOREIRA, G. R.; COELHO, F. E. Avaliação de custos de dois modelos de harvester no corte de eucalipto. Ciência Florestal, Santa Maria, v. 24, n. 3, p. 741-748, jul.-set., 2014. DOI: http://dx.doi.org/10.5902/1980509815733

SIMÕES, D.; FENNER, P. T.; ESPARANCINI, M. S. T. Produtividade e custos do feller-buncher e processador florestal em povoamentos de eucalipto de primeiro corte. Ciência florestal, Santa Maria, v. 24, n. 3, p. 621-630, 2014. DOI: http://dx.doi.org/10.5902/1980509815742

Downloads

Publicado

2018-12-17

Como Citar

Teixeira, R. de C., Santos, D. W. F. do N., Fernandes, H. C., & Dadalto, J. P. (2018). DESEMPENHO TÉCNICO E ECONÔMICO DO FELLER-BUNCHER EM DISTINTAS CARACTERÍSTICAS DENDROMÉTRICAS DO POVOAMENTO FLORESTAL. Nativa, 6, 782–786. https://doi.org/10.31413/nativa.v6i0.6177

Edição

Seção

Engenharia Florestal / Forest Engineering

Artigos mais lidos pelo mesmo(s) autor(es)